{"product_id":"527-904-blanke-underlayment","title":"Blanke Permat Tile Underlayment 6.5 sq ft Single Sheets","description":"\u003ch2\u003eBlanke Permat Tile Underlayment 6.5 sq. ft. Single Sheet\u003c\/h2\u003e\u003cp\u003eInnovative uncoupling underlayment that offers all the labor saving benefits of the old plastic roll systems. It also adds support to wood substrates thereby reducing deflection and provides greater compression and tensile strength than plastic roll products. This tile underlayment is stable to walk on during installation and does not require additional curing time when installing porcelain with latex modified thinset.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\/8\" thick\u003c\/li\u003e\n\u003cli\u003eDimension 6.5 sq ft and measures 2 ft x 3.2 ft.\u003c\/li\u003e\n\u003cli\u003eNo extended cure time for latex modified thinset mortars under porcelain tile\u003c\/li\u003e\n\u003cli\u003eCrack isolation properties (uncoupling)\u003c\/li\u003e\n\u003cli\u003ePermanent Support of high quality flooring, stone, marble\u003c\/li\u003e\n\u003cli\u003eReduces vertical sub-floor movement (deflection)\u003c\/li\u003e\n\u003cli\u003eInterior use only\u003c\/li\u003e\n\u003cli\u003eAdds the extra substrate support for stone floor installation (max L\/720 for stone vs L\/360 for tile)\u003c\/li\u003e\n\u003cli\u003eApproved for ceramic tile installation over layer of 3\/4\" plywood on 24\" o. c. joist spacing\u003c\/li\u003e\n\u003cli\u003e10 years replacement warranty against problems caused by excess deflection only warranty of its kind in the industry (see permat warranty for details)\u003c\/li\u003e\n\u003cli\u003eSuperior compressible strength\u003c\/li\u003e\n\u003cli\u003eStrengthens wood substrates thereby reducing deflection\u003c\/li\u003e\n\u003cli\u003eSuperior tensile strength\u003c\/li\u003e\n\u003cli\u003eCrack isolation properties (uncoupling)\u003c\/li\u003e\n\u003cli\u003eSuperior resistance to delaminating during installation\u003c\/li\u003e\n\u003cli\u003eNo extended cure time for latex modified thinset mortars under porcelain tile\u003c\/li\u003e\n\u003cli\u003eLightweight; easy to install\u003c\/li\u003e\n\u003cli\u003eSelf-seaming panels prevent substrate movement stress from transmitting to tiled surface\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch4\u003eInstructions for Installing Permat\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSubstrate must be clean, dry, flat and load bearing\u003c\/li\u003e\n\u003cli\u003eTrowel a more liquid than normal mix of thinset mortar onto substrate\u003c\/li\u003e\n\u003cli\u003eLay the Blanke PERMAT panels in a row so that the mesh overhang on the two sides of a panel cover the seams of the sides of adjacent panels without the overhang\u003c\/li\u003e\n\u003cli\u003eSubsequent rows of panels should be placed so that the seams running perpendicular to the previous row are offset a minimum of 3\" from the seams running in the same direction in the previous row\u003c\/li\u003e\n\u003cli\u003eUse the flat side of a trowel or a vinyl roller to press the panel into the thinset ensuring that the fabric on the underside of the panel achieves full contact with the thinset and that there are no air bubbles\u003c\/li\u003e\n\u003cli\u003eUse the flat side of the trowel to key thinset into the voids on top of the underlayment\u003c\/li\u003e\n\u003cli\u003eSet tile using a notched trowel appropriate for the type of tile and traffic. (Read Installation Instructions prior to installing this product)\u003c\/li\u003e\n\u003cli\u003eMovement joints are required in the tile surface per industry standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch4\u003eTypical Applications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIdeal alternative to backer board underlayment used in interior residential applications over wood substrates where excess deflection may be an issue and in commercial applications on concrete where stress cracks can be a problem\u003c\/li\u003e\n\u003cli\u003eIdeally suited for new home construction where demanding installation schedules cause traffic to cross on the underlayment prior to tile installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch4\u003eSuitable Substrates\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWood substrates stone and tile (including large format) Plywood EGP and OSB 16\" o.c. joist spacing, minimum subfloor thickness: 5\/8\" 19.2\" o.c. joist spacing, minimum subfloor thickness: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eWood substrates tile only (no larger than 16\"x16\") 24\" o.c. joist spacing, minimum subfloor thickness: 3\/4\" (subject to maximum joist span restrictions)\u003c\/li\u003e\n\u003cli\u003eConcrete substrates. Substrates covered with stone, tile and vinyl (consult thinset manufacturer instructions) Floor heating systems (consult Blanke installation instructions)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch4\u003eTechnical Data\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTop Mesh: Extruded twisted strands of highly alkali-resistant glass fiber, heat-welded to the lower layer of HDPE mesh\u003c\/li\u003e\n\u003cli\u003eBottom Mesh: Extruded twisted strands of alkali resistant high-density polyethylene (HDPE)\u003c\/li\u003e\n\u003cli\u003eFabric material: Polypropylene fleece\u003c\/li\u003e\n\u003cli\u003eThickness: approx. 3.3 mm (nominal 1\/8 inch)\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 0.8 kg\/m2 (approx. 2.6 ounces\/sq. ft): 1.06 lbs. per - panel: 31.8 lbs. per carton\u003c\/li\u003e\n\u003cli\u003eColor: Fabric: white HDPE Mesh: light-blue Top Mesh: dark blue\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"mySite","offers":[{"title":"Default Title","offer_id":52352196641014,"sku":"527-904-US","price":18.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0824\/0470\/4502\/files\/527-904-blanke-underlayment--20660_01_0998a006-ef5c-4e26-adb4-71cb0f6111f8.webp?v=1794294056","url":"https:\/\/www.coregoods.shop\/products\/527-904-blanke-underlayment","provider":"Coregoods","version":"1.0","type":"link"}